3M Hookit Purple Finishing Film Abrasive Disc 260L, 150 mm, 15 Hole

3M Purple Finishing Film Hookit Disc is used for scuffing the blend area before painting and removing dust nibs and excess orange peel from topcoats.

For a consistent finish, use 3M Hookit Purple Finishing Film Abrasive Disc 260L – our discs with a fast‐cutting, long‐lasting aluminium oxide mineral abrasive. Use them to sand top coat for blending, and for removing dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and they are quicker and cleaner than wet sanding. Use for scuffing the blend area before painting.

• Level orange peel, dust nibs or paint runs in all types of automotive paints
• Get a fast cut and long disc life with aluminium oxide abrasive
• Use for scuffing the blend area prior to painting
• Available in a wide range of grades
• Hookit attachment system makes for fast, efficient disc change-outs

Film backed abrasive disc for use in conjunction with a DA sander, for a wide range of Automotive and
Automotive Aftermarket operations, including primer sanding, paint preparation (matting of old
clearcoats), and removing defects from freshly clear coated surfaces.

P600 - Primer Sanding

P800 – P1000 - Clear coat blending / matting

P1200 – P1500 - Top coat defect removal

Physical Properties
Backing : Polyester Film
Mineral : Aluminium Oxide
Coating : Open Coat
Bonding : Resinbond
Stearate : Zinc
Grit range : P600-P1500

Storage
It is recommended that all Coated Abrasive Products should be stored at constant levels of temperature
and humidity within the ranges of 18-22°C, 50-65% RH. They should be kept away from damp (or cold)
walls, windows or floors to avoid possible moisture absorption. Equally storage adjacent to heat sources
e.g. steam pipes, radiators, hot air ducts, ovens, etc, should be avoided. Product is best stored in original packaging until ready for use. Shelf Life indefinite under these conditions.

Safety
Whenever possible, sanding should be carried out in a well-ventilated area and it is strongly
recommended that suitable goggles, dust mask and gloves are worn.

Discs should be used only on machines with a suitable support pad designed for the purpose and
maintained in good condition at all times.

The abrasive discs should extend symmetrically to no more than 2 mm beyond the outer rim of the
support pad. Damaged or misshapen abrasive discs or support pads should not be used.

Discs and pads should not be modified in any way. They should be used only in their original size and
shape, as supplied.

It is recommended that discs be used only on support pads that are clearly marked with maximum
permitted running speed. The speed stated should not be exceeded.

Machines should be operated with the disc making the shallowest angle possible with the workpiece.

Care should be taken to ensure that discs without a centre hole are mounted centrally on the support
pad.

When not in use, disc sanding machines should be placed in a stand designed for the purpose or,
alternatively, positioned on their backs. They must not be placed with the disc or pad face in contact
with the floor or workbench.

3M 260L Hookit™ Purple Finishing Film Abrasive Discs are designed FOR PROFESSIONAL
INDUSTRIAL USE ONLY.